Introducing the New Generation of FG Smart Cooled Incubator
Cooling system with unique NON-CUT technology
Capability to operate in high ambient temperatures (up to 30°C)
Temperature fluctuation of ±0.1°C even in cooling mode
40% energy savings
Frost-free operation
HCT (Homogenic chamber technology)
Rapid return to the set temperature after opening and closing the door of the device
Better thermal equilibrium and faster heating with the second-generation HCT
Temperature uniformity in 27 points of the chamber
Temperature stability
Triple-layer walls
DUAL SAFETY
Adjustable safety thermostat with a separate and independent sensor
Compliant with DIN 12880 Class 3.3 standard
Temperature control in case of unwanted temperature increase
Equipped with two PT100 sensors
Product video
To get to know More details of the product Watch the opposite video.
Table of technical specifications of CIF model laboratory refrigerated incubator
Customized equipment and services
Perforated stainless steel tray
Custom manufacturing based on specific dimensions and temperatures
Installation of vents in customized quantities and diameters
Glass door with a metal frame
IQ, OQ, PQ certifications
Provision of calibration certificate
Lighting lamp
Wire mesh tray
Frequently Asked Questions(FAQ)
It always takes time for the internal chamber temperature to reach the set point. The smart timer will show you the calculated time will be activated when the temperature of the device reaches the set point.
Yes, using a safety and adjustable thermostat in FG devices that acts like a fuse and turns off the refrigerated incubator device if the temperature rises above the set point.
According to FG standards and valid world standards, the best distance from the walls, floor, and ceiling of the incubator is 10% of the length of the same side. And if the depth of the device is 50 cm, 10% of it, that is, 5 cm from the front and back, should be considered the distance from the walls of the device for loading.
Using a safety thermostat in FG devices that works like a fuse and turns off the oven device if the temperature rises above the set point.
Yes, it is possible to create a vent or install a socket for FG incubators upon request.
Yes, you can move the trays if needed and according to the different drawers installed in the cooled incubator.
If you need to make maximum use of the internal space of the device, you can use more trays in the incubator. You can use more space just by buying a tray, and there is no need to pay extra for installing rails or other changes in the device.
If you still haven’t found the answer to your question, ask us.
"*" indicates required fields
