Introducing the new generation of FG smart laboratory ovens
The most accurate chamber in the world with unique isotherm in accordance with the most reliable international standards
Quick temperature return to the set temperature after opening and closing the device door
Better Uniformity and faster heating with the second-generation HCT
Uniformity @ 27 points of the chamber
Temperature stability
dual chamber
Double safety to protect your tests against unwanted increase or decrease in temperature
Adjustable safety thermostat with separate and independent sensor
Temperature control in case of unwanted temperature increase
According to DIN 12880 Class 3.1 standard
Two PT100 sensors
Video introduction of the laboratory oven
To get to know More details of the product Watch the opposite video.
Customized equipment and services
Tray made of mesh stainless steel sheet
Installation of valves in customized number and diameter
Glass door with metal frame
IQ, OQ, PQ Certificates
Calibration Certificate
Light bulb
External sensor
net tray
Door lock
FG Smart Laboratory Oven Technical Specifications Table
Frequently Asked Questions(FAQ)
According to FG standards and the world’s valid standards, the best distance from the walls, floor and ceiling of the oven is 10% of the length of the same side. For example, if the width of the device is 40 cm, 10% of it means 4 cm on each side (left and right) and if the depth of the device is 50 cm, 10% of it means 5 cm from the front and back, the distance from the walls of the device should be considered for loading.
Yes, with the help of the HCT technology used in the oven, even in the full load mode of the device (according to the principles of loading), you will have full uniformity.
The oven device reaches the set point temperature as quickly as possible and the temperature gradient adjustment is to prolong the time for the chamber temperature to reach the set point temperature, as a result, the time for the chamber temperature to reach the set point temperature cannot be made faster.
Using a safety thermostat in FG devices that works like a fuse and turns off the oven device if the temperature rises above the set point.
It always takes time for the internal chamber temperature to reach the set point. The Smart timer is activated when the temperature reaches the set point.
The cost of changing the color of devices is very high, so it is not cost-effective to do this.
Yes, based on the customer’s order, this feature is available for an additional fee.
The temperature range that is written about ovens, they usually have the ability to control in that range, but they are not very accurate at these temperatures or require changes in the settings of the device. Therefore, for temperatures lower than 80 degrees, usually the best option is an incubator.
No, the mechanism of the air release valve is the maximum exit of vapors and gases created in the chamber. But the circulator fan is used to accelerate the air circulation inside the chamber.
No, if you need more trays in the oven, you can use more space just by buying a tray, and there is no need to install rails or other changes in the device.
Yes, if needed, you can move the trays according to the different drawers installed in the oven.
Yes, a special mechanism has been considered for the air discharge process and the entry of fresh air into the oven chamber, which causes the maximum discharge of moisture and gases created in the chamber.
If you still haven’t found the answer to your question, ask us.
"*" indicates required fields
